---
title: "How to Build a Replica War Chariot: Dimensions, Joinery and Freight"
date: "2026-11-16T00:05:36+08:00"
modified: "2026-11-16T13:08:25+08:00"
url: "https://www.guwanli.com/blog/how-to-build-a-replica-war-chariot-chongqing-guide/"
markdown_url: "https://www.guwanli.com/blog/how-to-build-a-replica-war-chariot-chongqing-guide.md"
content_type: "blog_en"
description: "A siege chariot replica fails for one of…"
---

# How to Build a Replica War Chariot: Dimensions, Joinery and Freight

A siege chariot replica fails for one of two reasons, and neither of them is carving. It fails because the chassis was built to a photograph instead of to a manual, or because nobody planned the freight before the drawings were approved. A 3.5 m chassis with a 1.8 m wheel does not walk through a museum door, and a two-ton frame does not travel in a van.

We have built timber structures in Chongqing since 1978. This is how we approach a replica war chariot for a museum, a heritage park or a film set.

## What the Song Manuals Actually Specify

The primary source for Chinese siege and carriage design is *Wujing Zongyao* (1044, Song dynasty), a military compendium that records the dimensions and crews of the machines it describes. It separates vehicles by job rather than by size: the *yunti* (cloud ladder) is a scaling device carried to a wall, the *chaoche* (nest cart) is a wheeled observation tower with a suspended cabin, and the ram and the counterweight trebuchet are siege machines with their own chassis logic.

For a replica, the manual gives proportions and roles; it does not give a modern load case. That is the gap a workshop has to close. A museum piece is judged by silhouette and detail, a heritage park piece is judged by whether a visitor can climb on it, and a film prop is judged by how fast it can be reset between takes. The same drawing serves all three only if the frame underneath is specified for the hardest of the three.

## Chassis Dimensions We Quote

The table below is our standard mid-size two-person chassis, the size most often specified for museum galleries and park displays. Figures are our build standard, adjusted from historical proportions for contemporary loads and transport.

| Component | Dimension | Construction |
| --- | --- | --- |
| Overall length | 3.5 m | Hardwood frame, 100 x 100 mm members |
| Track width | 2.2 m | Through axle, locked with wooden dowels |
| Wheel diameter | 1.8 m | 20 rim segments, 12 spokes, solid tyre |
| Deck height | 1.1 m | Planked deck, removable for crating |
| Static load | 400 kg | Deck and chassis together |
| Dry weight | approx. 320 kg | Timber only, without ballast |
| Crates | 6 | Largest crate 2.0 x 1.0 x 0.9 m |
| Rebuild on site | 5 hours | 3 people, hand tools only |
| Lead time | 45-60 days | From approved drawing to crating |

Two of these numbers decide the project more than the rest. Dry weight sets the freight class, and the largest crate sets the door. If a gallery has a 0.9 m clear opening, we design the wheel as four quarter-rims rather than twenty segments, and the crate list changes with it.

## Joinery: Why the Tenon Angle Matters

Nails in a replica are a maintenance schedule, not a shortcut. A nailed joint loosens as the timber dries, and on a vehicle that is pushed and pulled by visitors it loosens faster than on a building.

We cut the tenon with a 15-degree bevel so that vertical load drives the joint tighter instead of levering it apart. The wheel rim is segmented and wedged rather than glued as a single ring, because a ring that is glued cannot be repaired when one segment checks. Tyre faces are left with a drainage chamfer so water leaves the rim instead of sitting in the joint line.

Timber is kiln-dried to 8-12 percent moisture content before cutting. Cut it wet and the tenon shrinks after assembly, and the joint that was tight on the bench is loose by the first dry week.

## Freight, Assembly and the Paperwork

Every member is numbered to the drawing and the crate plan lists which crate holds which numbers, so a museum technician can rebuild without our staff on site. The rebuild sheet is written for a technician, not for a carpenter: torque-free, hand tools only, no glue on site.

For export we quote FOB or CIF with the crate dimensions declared, because the freight class is usually the line that surprises a curator. Where a gallery wants the piece installed rather than assembled, we quote a supervisor’s visit separately.

## Museum, Park or Film Set: Three Different Builds

**Museum.** Static, detailed, and usually behind a barrier. We build solid, publish the load drawing, and keep the deck non-climbable.

**Heritage park.** Climbable and photographed all day. Deck edges get a handrail fixing point, the chassis gets a hidden steel spine painted to match the timber, and the wheels get a wear plate where visitors step.

**Film set.** Reset speed matters more than permanence. Hollow-core members cut weight by roughly 30 percent while keeping the visual density, and duplicate units are built to the same member numbering so a damaged piece can be swapped between takes.

### FAQ

**Which timber do you use?** Camphor or oak for the chassis, larch for outdoor park pieces. All kiln-dried to 8-12 percent before cutting.

**Can visitors ride it?** A properly built chassis carries 400 kg static. Whether visitors may board is the operator’s decision, and we supply the load drawing they need to make it.

**How long does it last outdoors?** Fifteen to twenty years with an annual joint inspection and a linseed oil refresh. The wear points are the tyre faces and the deck edge, not the frame.

**Do you build the siege machines too?** Yes — cloud ladders, nest carts and rams to the same numbering and crating system, and we can supply a set to one drawing standard so a gallery reads as one collection rather than a group of unrelated props.

## Ordering

Send the period you are representing, the clear opening of the gallery door, and whether the piece is static or interactive. We reply within 24 hours with a drawing, a crate plan and a delivered price.

Call or WhatsApp +86 138 8336 6528. The chariot and siege range is here: [ancient war chariot replica and custom wooden siege engine](https://www.guwanli.com/products-en/ancient-war-chariot-replica-custom-wooden-siege-engine/). If your project also needs the bracket sets that hold a pavilion roof together, see [dougong bracket restoration and custom corbel sets](https://www.guwanli.com/products-en/dougong-bracket-restoration-custom-chinese-corbel-sets/).

**Call/WhatsApp: +86 138 8336 6528** 
Chongqing Zhongyu Wooden Crafts Products Co., Ltd. – timber structures built in Chongqing since 1978

---

**重庆中裕木制工艺品有限公司（中裕木艺 / 古玩里）**

- 官网：https://www.guwanli.com
- 采购咨询：13883366528（微信同号）
- 1978 年建厂 · 48 年木作传承 · 源头工厂直销 · 全国上门安装
